Please note - this is a commercial website
Call: +44 (0) 1344 752753 / +44 (0) 7970 541757
E-mail: rusmilitary


film & TV  contact us payment events special offers ViewCart
AK47 AKM CyberGun 177 Co2 air rifle
under barrel grenade launcher to be fitted onto our Limited Edition AKM / AK-15 rifles and most of deactivated and airsoft AKs to fire TAGInn grenades

4.5mm (.177) AKM (AK-47) Co2 training air rifle

Our 4.5mm /.177 Special Edition CYBERGUN AKM (AK-47) Co2 bb air rifles are based on real AKM (Type56) receiver. We remove "fake" alloy parts from factory CyberGun AK and replace them with all new solid steel parts including rear sight base, front sight block, gas block (with bayonet lug), flash hider / muzzle brake, gas tube, lower handguard retainer, cleaning rod and trigger pin. AKM ribbed dust cover (£32), a real AK magazine filled with 7.62mm inert rounds, AK bayonet and PBS-1 replica suppressor are a perfect fit to our AKM and are optional. UNIQUE to Rusmilitary! Essentially we build "deactivated" AKs with all moving parts, which are Co2 bb air rifles at the same time. They are cheaper then old spec deacts (!) and suitable for firearms training. Power upgrade comes as standard and all rifles are perfectly zeroed on our indoor range. We can also install all sorts of tactical furniture on order - please contact us to discuss options
Calibre, mm
4.5 (.177)
Muzzle velocity, fps
Weight, kg
Fire action
Magazine capacity, BBs
Energy, Joule (appx)
PRICE (AKM / Type56 wood)
PRICE (AKM / Laminated Ply Wood + Ribbed dust cover + bakelite mag)
AK47 steel mag with 5 inert rounds / £37
AKM bayonet / POLISH / £64
Adjustable windage & elevation rear sight / £72-00
FREE authentic Russian AKM canvas sling !

< Check out our new video on YouTube featuring Co2 AKM and AK-104 in action ! © RusMilitary / 16.10.21

CyberGun AK-47 177 Co2 power upgrade air rifle
We can also install parts kits on those rifles sold earlier. Basic prices include all steel parts (no alloys): Rear sight base £100 + gas tube £36 + HG retainer £36 + AKM gas block £36 + AKM front sight & sla nt muzzle brake £100 + cleaning rod £25+ a so-called "full-auto" trigger pin to plug holes in the receiver (£10) + 4 hours of labour including the use of lathe in order to reduce the barrel width in 3 places, which requires the barrel to be taken off - £250). Other OPTIONAL accessories include AKM laminated stock set (£275), Soviet bakelite magazine (£60) and its conversion (£36), a steel PBS-1 dummy silencer (£95) and AKM Type2 bayonet (£64). Pls note both Type1 and Type2 bayonets can be attached to AKM rifles. All sorts of other furniture can be installed on order. Please contact us for options. CLICK to view a promotional SPOT the DIFFERENCE picture
Price: £589-00
PRICE (ALL-STEEL construction PBS-1 dummy silencers comprise a "barrel extention tube" inside and come with the original 14mm LH thread (AKM / AK-47 / Bison-2). They are ideal for AK47 air BB rifles, airsoft AKs or as display pieces attached to de-activated guns)
PRICE (.177 standard factory spare polymer magazine)
PRICE (177 power upgrage mag - appx 4.2 Joules / estimated 475 fps)
IN STOCK >> currently available when purchased with AK47 bb rifle*
PRICE (After-market AKM ply-wood stock set + bakelite pistol grip to fit CyberGun AK) 
* Custom-built / converted power upgrade polymer Co2 magazines have to be fitted and tested for each individual rifle. We recommend that customers buy extra magazines at the time when ordering a rifle, so that we can fit everything properly in our workshop. Power mags are only available as a supplement to a purchased rifle
>CLICK to view the latest test results: Factory Mag vs. PowerUpgrade Mag (!)
LEARN how to fit magazine properly! Practice ROCK-N-LOCK technic with just a magazine body first (Pic1), making sure the mag "neck" is lined up with the receiver (Pic2). When fitting a fully assemble magazine (Pic3), it will feel harder to pull it backwards to lock in place because of the resistance of the rubberised chamber - wait for a "click" of the rear locking lug. Make sure a BB feeding hole is lined up with the barrel (rubberised chamber). If the trigger is not working, it means the magazine is not fitted properly. If a rubberised chamber prevents the magazine from being fitted correctly with a "click", push alluminium ring (Pic3) slightly forward with a screw driver and try again (CLICK on images below to enlarge). In order to reduce air leak while punching an airbulb, use a vice to increase the leverage and rotate a magazine itself instead of a tightening bolt. CLICK to view image. CLICK here to fix misfire when magazine is properly locked inside the magwell


Thank you for dropping off the AK15 earlier in the week. I've had a chance to evaluate it over the last couple of days and to say I'm impressed would be an understatement. These rifles are described as better than a deactivated AK and this is most certainly true due to current legislation around deactivated arms, which cannot even be field stripped. On the contrary, your AK will field strip in the same manner as an original and correct parts are fitted, including the plunger retained gas plug, which is unique to the AK12/15. The muzzle break is an original too and is also plunger retained. It will accommodate a bayonet (supplied) and interchange quickly for the supplied silencer. The folding tubular butt stock I opted for is solid when locked and folds to one side, just as with the original. As a fan of aperture sights, I was delighted to see the AK15 is fitted with a correct aperture unit. Not much adjustment was necessary post delivery but I was able to fine tune the sights on the foresight. Again, unlike a deactivated firearm, your AK15 performs incredibly well. I used copper coated lead BBs (Smart Shot) and zeroed for 6 yards. The AK is hard hitting for a BB calibre arm. I'm loath to say replica as it is built from correct steel AK12/15 parts using the CyberGun receiver as the base, which in itself is a quality item. Target acquisition is quick and I must have fired around 80 shots from one magazine before recharging with another CO2 cartridge was necessary. This was with the supplied open sights and I've not even fitted an optic yet! I'm sure an EOTech type sight will enhance accuracy and target acquisition even further. You are to be congratulated on an excellent item. Not cheap but gone are the days when subsidised AKs could be traded for a bag of grain and this AK15 is well worth the cost. Kind regards, John Milewski / Airgun World Regular Contributor and Tester / 05.03.23

Dear RusMilitary, Many thanks indeed for my limited edition AKM, it has not disappointed at all. Your work installing the extra steel components was excellent, and they really make the difference. The rifle offered me an ideal base on which to install some extra pieces of furniture myself that has resulted in the perfect authentic plinker - nothing shoulders like an AK does (please see attached picture)! I am seriously considering purchasing another, but in the meantime I will be ordering an extra power upgrade magazine and ancillaries.  Thanks again. Kind regards (E-mail from Alex / 05.2020)

OUR COMMENT: By adding some Russian furniture, AK47 steel magazine and deactivated bolt carrier, Alex effectively converted air rifle into an old-spec deacivated rifle with ALL moving parts ! and it is legal !

Hello. Please see below and feel free to use on your site! Very Happy. I just wanted to say thanks for the excellent job on preparing my AKS 74. It looks awesome and is a real joy to shoot, I am going to get years of pleasure from it. The quality is second to none and the look and feel is essentially the real thing. I have come across AK's on a few occasions during service and can assure anyone of the fact that really this is close to the real thing as your going to get. The Cybergun AKM I also took delivery of is also a great bit of Kit. The power upgrade certainly does the business and the rifle knocks down targets effectively with a good punch. You can really tell the difference it changes the rifle from a plinker to a respectfully useful shooter, the first two mags knock down the metal targets on my magnetic range with no problem. The piece is no TX200 but is great fun to shoot and as a replica (which is really why your buying this) gives the added pleasure of also having some satisfying shooting. It is also surprisingly accurate! I would advise anyone buying one of these to make sure they read your tips on mag insertion as I experienced trouble exactly as you describe with the trigger action. Once I got the hang of things and the mag had been used a few times then no problems at all. This is the second time I have taken delivery of pieces from you Oleg and I know it will not be the last. All the Best (E-mail from Howard / 21.07.19)

Excellent service from start to finish. She is so smooth all the power is transferred directly to the projectile. Instantaneous at 45 feet. Thank you (SMS from Norman in Manchester / 25.04.19)

Conditions of purchase in the UK (MAIL ORDER): NO LISENCE REQUIRED ! but in accordance with Violent Crime Reduction Act (Section 33: Age limits for purchase etc of air weapons), from October 2007 customers are required to prove their age when purchasing this product in person (18 years of age or over!). The transaction of an airgun is to be conducted face-to-face or through your nearest airgun or firearms shop/ retailor. A document confirming your age will be required on collection of an airgun. The above law does not apply to customers overseas. To find your nearest Air Gun retailor search or come and collect by appointment

EU / Europe airguns can be shipped safely to any EU member country for just £30. All parcels are insured and trackable via internet

Non-EU countries (USA / Canada / Norway / Switzerland etc) We do NOT ship air guns outside the EU

© Copyright RusMILITARY 1999-2024

Tel: 01344 752753 E-mail: rusmilitary